3—（3,5—二氨基—2,4,6—三硝基苯基）氨基—5—硝基—1,2,4—三唑的合成

多硝基多氨基三唑类衍生物作为含能材料,具有高氮、致密、钝感等优点。本文通过3-氨基-1,2,4-三唑和三硝基三氯苯的缩合,再经过三唑碳原子上的硝化反应和芳环上的氨化反应,合成并鉴定了标题化合物。     

三乙酰基三苄基六氮杂异伍兹烷(TATBIW·0.5H2O)的合成及晶体结构

通过控制六苄基六氮杂异伍兹烷(HBIW)的氢解程度,成功制备了其氢解反应过程中一个重要的中间体三乙酰基三苄基六氮杂异伍兹烷(TATBIW),并对其单晶结构(TATBIW·0.5H2O)进行了测定,它属三斜晶系,空间群为P-1,a=0.9893(2)nm,b=1.2624(3)nm,c=1.3396(3)nm;V=1.5963(6)nm3,z=2,Dc=1.194 g·cm-3,该化合物的单晶数据未见文献报道.TATBIW的制备有助于我们进一步了解HBIW的氢解反应机理,提高氢解产品得率.     

Permselectivities and ion-exchange properties of organically modified sol—gel electrodes

Sol—gel films prepared from organosilanes containing acidic/basic sites have been investigated as permselective and ion-exchange coatings for electroanalytical and bioanalytical investigations. When a glassy carbon electrode was modified with a sol—gel film fabricated from 3-aminopropyl-methyl-diethoxysilane (silane—NH₂), excellent permselectivity and anion-exchange properties were obtained. For a pH 7.4, 1 mM potassium ferricyanide solution, an eight-fold increase in current was observed after the electrode was immersed in solution for 10min whereas complete suppression of the electrochemical response for ruthenium hexaamine and methyl viologen was observed. Sol—gel films fabricated from trimethoxysilylpropyl ethylenediamine triacetic acid (silane—(COOH)₃) exhibited nearly complementary behavior. An approximately 10-fold increase in current was observed for pH 7.4, 1 mM ruthenium hexaammine solutions and complete suppression of the potassium ferricyanide response was observed. These ion-exchange properties can be attributed to the strong electrostatic interactions between the acid/basic functional group in the matrix and the highly charged analyte molecules. When glassy carbon electrodes were modified with diethyl-(triethoxysilypropyl) malonate (silane—(COOEt)₂), the films did not exhibit distinct ion-exchange properties but rather suppressed the reduction of potassium ferricyanide. The observed permselectivity results from the electron dense carbonyl group and/or hydrolyzed ester functionalities in the film.     

Combining Taguchi with fuzzy method on extended optimal design of miniature zoom optics with liquid lens

In this paper, the Taguchi method combined with fuzzy approach was applied to find the extended optimization for a multi-objective design of a miniature 2.5× zoom fold optics with liquid elements. Relative illuminance (RI) and modulation transfer function (MTF) were considered to be optimized. The experiments were simulated and the results were evaluated by the optical software tool CODE V. It was concluded that the method used in this research was successful in optimizing the values. In our proposed method, the appropriate weight of MTF and RI for the inputs of fuzzy controllers increased the MTF by 9.92%, but the RI only reduced by 0.19% in systematic wide-angle end, respectively.     

Euphorbiane: A Novel Triterpenoid with an Unprecedented Skeleton from Euphorbia tirucalli

Euphorbiane ( 1 ), a novel triterpenoid exhibiting a unique skeleton, together with seven known compounds were isolated from the 95% EtOH extract of the fresh stems of Euphorbia tirucalli. The structure of 1 and relative stereochemistry were elucidated by extensive NMR and a single‐crystal X‐ray crystallographic analysis.     

Thermokinetic parameters analysis for 1,1-bis-(tert-butylperoxy)-3,3,5-trimethylcyclohexane at isothermal conditions for safety assessment

The rapid development of the petrochemical industry of Taiwan over the past four decades has resulted in a booming economy in Taiwan that drives derived industries to develop progressively. However, it has also caused many runaway reaction accidents, such as toxic gas release, fire, and explosion. It is crucial to eliminate those potential hazard factors which can induce consequent runaway reaction accidents during the life span of the manufacturing process. In response to this crucial issue, we performed a thermokinetic parameter analysis for 1,1-bis-(tert-butylperoxy)-3,3,5-trimethylcyclohexane at isothermal conditions to conduct a thermal safety assessment of chemical materials. The five isothermal temperatures, 90, 100, 110, 120, 130, and 140 °C, measured by DSC, were adopted in this study to calculate process safety parameters, including TMR_ad, T _NR, and SADT, which can be employed in process safety parameters for the manufacturing process. A novel, green kinetic approach accompanied with non-isothermal DSC results is used to derive thermokinetic parameters in safety protocol in this study.